 |
The Massey-Harris Pony |
- Capacity: One 14 inch plow
- Performance (Nebraska test no 401) 11.62 hp max. belt; 10.43 hp
max. drawbar;
max. pull 1432 lbs at 2.57 mph (corrected to sea level basis)
12.16 hp max. belt; 11.08 hp max. drawbar.
- Engine: Continental Model N62, L-Head, 4 cylinders vertical, 2
3/8"x3 1/2"-1800 rated rpm. 2050 max. no-load rpm, 2000 to 2050
governed no-load rpm, displacement 62 cubic inches.
- Service Data: Champion 18 mm spark plugs, part no. 18625A; 3
rings per piston, 2 compression 3/32", 1 oil 3/16".
- Accessories:
- Auto-Lite Model GBM-4804-A5 generator
standard equipment;
- Exide battery standard equipment;
- Marvel-Schebler Model TSV-16 carburetor, size 5/8";
- Continental built-in governor;
- Canadian Motor lamps;
- Donaldson Model A4151 air cleaner;
- Purolator Model 749 oil filter, cartridge no. P70;
- Rockford single-disc 2-piece clutch, part no. 6-1/2-RM;
- National radiator core, capacity 1 4/5 gallons;
- Fuel tank capacity 6.8 gallons;
- Motor Wheel front and rear wheels
- Timken front wheel, rear axle and transmission bearings.
- Tires:
- Standard-8x24 rear, 4.00x15 front
- Oversize-9x24 rear
- Brakes: Two brakes located on bull pinion shaft, foot
operated either individually or simultaneously by interlocking.
- Speeds:
- Standard tires-2.74, 3.59 and 7.00 mph, reverse 3.22 mph.
- Oversize tires-2.88, 3.77 and 7.35 mph, reverse 3.37 mph
- Shipping Weight: 1450 lbs.;
- Dimensions:
- Wheelbase 66";
- height overall 60";
- width overall, min. 56", max. 80";
- rear wheel tread, min. 41", max 69";
- cultivating clearance 21" with standard tires or 21 1/2" with
oversize tires;
- turning radius 8 1/2'
- Power Take-Off (Optional) 1 1/8" 6 spline shaft, 534 RPM;
spline end 26 7/8" above ground, 1 1/4" right of centre line of
tractor and 16" ahead of hitch point.
- Pulley: (Optional) 6 x 5 1/2", 1990 rated rpm, 2155
governed no-load rpm; belt speed 3130 fpm.
- Lubrication:
- Crankcase capacity 4 quarts;
- transmission case capacity 3 3/5 qts.;
- final drive housing 1 1/2 qts.;
- 3/4 qt. added for PTO and belt pulley.
- Hydraulic Lift: (Optional)
- Pesco pump;
- 2 1/2 gpm delivery at 1000 psi operating pressure;
- reservoir oil capacity 1 1/2 qts.
- Double acting cylinder:
- 2" inside diameter;
- 5" piston stroke;
- max. piston force 3140 lbs.;
- both push and pull variable stroke control;
- cylinder length between pin centres 16";
- 7/8" diameter attaching pin.
[ M-H Home ]