 |
The Massey-Harris Pacer |
- Capacity: Two 12 inch plows
- Performance:
- Nebraska Test no. 531
- 18.87 hp max. belt;
- 17.05 hp max. drawbar;
- max. pull 2118 lbs. at 2.77 mph;
- (Corrected to sea level basis) 19.19 hp max. belt;
- 17.31 hp max. drawbar.
- Engine:
- Continental Model Y91, L-Head, 4 cylinders vertical, 2 7/8" x 3 1/2";
- 1800 rated rpm
- 2050 max. no-load rpm, 2050 governed no-load rpm
- displacement 91 cu. in.
- Service Data:
- Champion 18 mm spark plugs, part no. 8 Comm.;
- 3 rings per piston, 2 compression 3/32", 1 oil 1/4".
- Accessories:
- Auto-Lite Model GHD-6001Z generator
standard equipment;
- SAE-IM battery standard equipment;
- Marvel-Schebler Model TSX-541 carburetor;
- Novi or Pierce governor;
- Guide lamps;
- Donaldson Model A4152 air cleaner;
- Purolator Model PM708 oil filter, cartridge no. P70;
- Rockford single plate clutch, part no. CLA-1938-1AC;
- National radiator core, capacity 1 4/5 gals.;
- thermostat standard equipment;
- Fuel tank capacity 7.5 gallons;
- Motor Wheel front and rear wheels
- Timken front wheel and rear axle bearings;
- Timken and S.K.F. transmission bearings.
- Brakes: Two brakes located on differential shafts, foot
operated either individually or simultaneously by interlocking.
- Speeds:
- Standard tires-2.88, 3.77, and 7.35 mph, reverse 3.37 mph.
- Shipping weight: 1930 lbs.
- Dimensions:
- Wheelbase 72 3/8";
- height overall 65 7/8";
- width overall min. 57", max. 78 1/2";
- rear wheel tread min. 41", max. 69";
- cultivating clearance 20 1/2";
- turning radius 9 1/4'.
- Power Take-Off (Optional)
- 1 1/8" 6 spline shaft, 540 RPM;
- spline end 27 27/32" above ground, 1 5/16" right of centre line of tractor and 9 5/8" ahead of hitch point;
- Pulley: (Optional)
- 6 x 5 1/4"
- 1990 rated rpm, 2265 governed no-load rpm;
- belt speed 3125 pm.
- Lubrication:
- Crankcase capacity 3 quarts;
- transmission case capacity 3 qts.;
- each final drive housing 1 4/5 qts.;
- 3/4 qt. added for PTO and belt pulley.
- Hydraulic Lift: (Standard)
- Pesco pump;
- 3 gpm delivery at 1070 psi operating pressure;
- 2 1/4" inside diameter;
- 5" piston stroke;
- max. piston force 4260 lbs.;
- cylinder length between pin centres 16-21";
- 7/8" diameter attaching pin, mounted end and 11/16" rod end