 |
The Massey-Harris Colt |
- Capacity: Two 14 inch plows
- Performance: Not tested at Nebraska
- Engine:
- Continental Model F124, L-Head, 4 cylinders vertical, 3"x4
3.8";
- 1500 rated rpm. (drawbar), 1800 rated rpm (belt);
- 1720-1728 (drawbar), 1947-1955 (belt) governed no-load rpm;
- max. rpm same as governed no-load rpm;
- displacement 124 cu. in.
- Service Data:
- Auto-Lite, BT8 or Champion, 8 Comm. 18 mm spark plugs;
- 4 rings per piston, 3 compression 1/8", 1 oil 1/4".
- Accessories:
- Auto-Lite Model GHD-6001V generator
standard equipment;
- Exide model SS-1 battery standard equipment;
- Marvel-Schebler Model TSX-34 carburetor, size 7/8";
- Novi Model 53032H governor;
- Guide lamps;
- Donaldson Model A5492 air cleaner;
- Purolator Model P-721 oil filter, cartridge no. 1003879M1;
- Borg & Beck 2 piece clutch, part no. 760261M91;
- Modine radiator core, capacity 3 gallons;
- Harrison thermostat standard equipment;
- Fuel tank capacity 13 gallons;
- own front and rear wheels
- Timken front wheel, rear axle and transmission bearings.
- Tires:
- Standard-10x28 rear, 5.00x15 front (Std)
- 4.00x15 front (RT, RS)
- Brakes: Two brakes located on rear axle shaft, foot
operated either individually or simultaneously by interlocking.
- Speeds:
- Standard tires-2.45, 3.51, 4.61 and 12.99 mph, reverse 2.45
mph.
- Dimensions:
- Wheelbase 75 3/4" (Std), 82 1/2" (RT,RT), 58 1/8" (RT,HA);
- rear wheel tread min. 52", max. 52" (Std), 80" (RT,HA), 88"
with hub extension;
- cultivating clearance 19 3/8";
- Power Take-Off (Optional)
- 1 3/8" 6 spline shaft, 551 RPM;
- spline end 24 3/4" (Std), 24 5/16" (RT) above
ground, 3 7/32" left of centre line of tractor;
- Pulley: (Optional) 9 1/2" x 6 1/4", 1224 rated rpm, 1325-1330
governed no-load rpm; belt speed 3044 fpm.
- Lubrication:
- Crankcase capacity 5 quarts;
- transmission case capacity 2 gallons;
- each final drive housing 13 1/2 qts.;
- 3 1/2 qts. added for PTO and belt pulley.
- Hydraulic Lift:
- Standard on RT, HA
- Optional on Std
- Webster model 2HC1A-3 pump;
- 7 1/4 gpm delivery at 1070 psi operating pressure;
- 3" inside diameter;
- 6 3/16" piston stroke;
- max. piston force 4800 lbs.;
- cylinder length between pin centres 15";
- 3/4" diameter attaching pin.
[ M-H Home ]