Performance (Nebraska test no 389) 45.64 hp max. belt; 39.90
hp max. drawbar;
max. pull 4612 lbs at 2.09 mph (corrected to sea level basis)
47.04 hp max. belt; 41.36 hp max. drawbar.
Engine: Own Model H260, O-head, 4 cylinders vertical,
removable cylinder sleeves. 3 7/8 X 5 1/2" -1350 rated RPM, 1510 to 1525 max.
no-load rpm, displacement 260 cu. in.
Service Data: Champion 18 mm spark plugs, part no. 18625A;
Four rings per piston, 3 compression 1/8", 1 oil 1/4".
Accessories:
Auto-Lite Model GHH-6001D generator
standard equipment;
Exide Model SS-1 battery standar equipment;
Zenith Model 62AJX9 model carburetor, size 1 1/4";
own governor;
Guide lamps;
Donaldson
Model A-5342 air cleaner;
Purolator Model P-913 oil filter, cartridge no. 760-999-M1;
Borg & Beck 2-piece clutch, part no. 763598;
Modine radiator core, capacity 5 3/4 gallons;
Harrison thermostat standard equipment;
fuel tank capacity 19 gals. (Std.), 23 gals. (R.C.);
Motor Wheel front wheels;
French and Hecht (Std.) and Motor Wheel (R.C.) rear wheels;
Timken front wheel and rear axle bearings;
Timken, Hyatt and New Departure transmission bearings.
Tires:
Standard-13x30 (Std.), 11x38 (R.C.) rear;
6.00x16 (Std.), 5.5x16 (R.C.) front.
Oversize 12x38, 13x38 (R.C), 14x30 (Std.) rear.
Brakes: Two brakes located on differential shaft, foot
operated either individually or simultaneously by interlocking.
Speeds: Standard tires-(R.C.) 2.40, 3.63, 4.82, 6.27 and
13.37 mph; reverse 3.16 mph. (Std.) 2.21, 3.33, 4.43, 5.75 and
12.28 mph; reverse 2.89 mph. Oversize tires-(R.C.) 2.48, 3.75,
4.98, 6.47 and 13.80 mph; reverse 3.26 mph.
Dimensions: Wheelbase 79 1/2" (Std.), 87 3/4" (R.C.) height
overall 77 1/2" (Std.) 80" (R.C.); width overall 68 9/16" (Std.),
minimum 79" (R.C), max 101 1/8" (R.C.); rear wheel tread 54 1/8"
(Std.), min 51 1/4" (R.C), maximum 88 3/8" (R.C.); cultivating
clearance 25 5/8" with standard tires or 26 3/4" with oversize
tires; Turning Radius 11' (Std), 9' (R.C.).
Power Take-Off (Optional) 1 3/8" spline shaft, 534 RPM;
spline end 32 5/8" (Std.), 36 1/16" (R.C.) above ground, 3/8"
left of centre line of tractor and 14" ahead of hitch point.
Pulley: (Standard) 13 1/2 x 6", 863 rated rpm, 965 to 970
governed no-load rpm; belt speed 3050 fpm.
